Power chips are connected to exterior circuits via product packaging, and their performance relies on the assistance of the packaging. In high-power scenarios, power chips are normally packaged as power modules. Chip affiliation refers to the electric connection on the upper surface of the chip, which is usually light weight aluminum bonding cord in traditional modules. ^
Conventional power module plan cross-section
At present, business silicon carbide power modules still primarily make use of the packaging innovation of this wire-bonded traditional silicon IGBT module. They deal with issues such as large high-frequency parasitic specifications, not enough heat dissipation ability, low-temperature resistance, and insufficient insulation strength, which restrict the use of silicon carbide semiconductors. The display of outstanding efficiency. In order to resolve these problems and totally manipulate the massive prospective advantages of silicon carbide chips, lots of brand-new product packaging innovations and services for silicon carbide power modules have actually emerged in recent years.
Silicon carbide power component bonding approach
(Figure (a) Wire bonding and (b) Cu Clip power module structure diagram (left) copper wire and (right) copper strip connection process)
Bonding materials have actually developed from gold cord bonding in 2001 to aluminum cord (tape) bonding in 2006, copper cable bonding in 2011, and Cu Clip bonding in 2016. Low-power gadgets have actually created from gold wires to copper cables, and the driving pressure is price decrease; high-power devices have actually created from light weight aluminum cables (strips) to Cu Clips, and the driving force is to enhance item efficiency. The higher the power, the higher the requirements.
Cu Clip is copper strip, copper sheet. Clip Bond, or strip bonding, is a packaging procedure that uses a strong copper bridge soldered to solder to attach chips and pins. Compared to conventional bonding product packaging approaches, Cu Clip innovation has the adhering to advantages:
1. The link in between the chip and the pins is made of copper sheets, which, to a certain degree, changes the basic cord bonding method between the chip and the pins. For that reason, an unique package resistance value, higher present flow, and far better thermal conductivity can be obtained.
2. The lead pin welding area does not require to be silver-plated, which can completely save the cost of silver plating and inadequate silver plating.
3. The product look is entirely consistent with regular products and is generally utilized in web servers, mobile computers, batteries/drives, graphics cards, motors, power supplies, and other fields.
Cu Clip has two bonding approaches.
All copper sheet bonding approach
Both the Gate pad and the Resource pad are clip-based. This bonding technique is more costly and complicated, however it can attain better Rdson and much better thermal effects.
( copper strip)
Copper sheet plus wire bonding method
The resource pad makes use of a Clip technique, and eviction uses a Cable method. This bonding method is somewhat cheaper than the all-copper bonding method, saving wafer area (applicable to really tiny gateway locations). The procedure is simpler than the all-copper bonding approach and can obtain much better Rdson and far better thermal effect.
Supplier of Copper Strip
TRUNNANOÂ is a supplier of surfactant with over 12 years experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you are finding brochantite, please feel free to contact us and send an inquiry.
Inquiry us